Danny Szabo Trex 450 Helicopter Las Vegas Video Clips.
Danny Szabo in Las Vegas on a winter day flying his Trex 450
Tags: danny, szabo, trex, rc, helicopter, alanszabo
I decided to buy our MAWA010B2 in red for myself. We sell this helicopter for a low cost and I wanted to see how they really fly. So I figured I'd get one and then I could do a flight review for my clients.
I received the MAW010B2 (for those who don't know MAW stands for Model Airplane Workroom) and it came ready to fly. It had the remote, AC adapter, rechargeable battery pack (Li-Po), and an adequate instruction manual on how to fly this RC. I opened the box and pulled everything out first. After I had it out, I wondered if the blades were broken and tried to straighten them out, and then I wanted to tighten them because they seemed way loose. That is ok, they are loose and can fold up, when you go to fly this RC helicopter, you don't have to tighten these blades, and you shouldn't tighten them, they will straighten themselves out immediately when you slowly push the throttle forward. Like other starter helicopters made in China, the instructions are a little hard to understand in parts, they aren't written by someone who speaks English as there 1st language, but you get the point. I didn't understand how long to charge the helicopter the very first time. After the first time you should charge the helicopter for 2 hours to really get some good flying time out of it.
Once I'd read everything and charged the battery up until it felt pretty warm, which was about 2 hours, I unplugged the charger and plugged the battery into the engine on the helicopter. This RC helicopter is nice because you just pull the front plastic piece forward by undoing the top two hooks and charge the battery while it is still on the helicopter, and when you are done, it takes ten seconds to hook the battery into the helicopter and pull down the plastic piece there for looks. The remote does need 8 AA batteries to work. Once I had those it was time to test it.
Make sure you have the antenna all the way extended, as this type of helicopter already only has about 30 feet or so of range. Don't allow this helicopter to get out of range, if it goes too high, just get underneath it and SLOWLY bring the throttle down, never less than half way, and if the helicopter starts to come down, push the throttle up to make the helicopter level out. I learned the hard way that if you let it start to fall too quick, hitting full throttle still won't slow this copter down enough, and the first thing to break will be the landing skids. Nothing that a little superglue, electricians tape and patience can't fix, but what a pain. So stay under it, and don't ever let it come down too quick. The bottom rails can be unscrewed and replaced, I still haven't figured out how to order extra parts for this particular model though, so if any of you figure it out, I would love to know.
Here is another piece of advice. The first time I flew this RC helicopter, it was outside, and a tad bit windy, I didn't really notice the wind, but my helicopter did. The first time you fly this RC, I would suggest either the inside of a gym, or just a really wide-open parking lot or field on grass might even be better. The first thing I did was slowly push the throttle up, got the propellers moving, then, as the instructions say to do, I pushed it up more to get the helicopter off the ground so it wouldn't tip over and break something. Once it's in the air though, make sure you pull back on the throttle somewhat so it doesn't fly up real high. My suggestion is to take your time the first three or four flights and just keep it like 6 to 8 feet off the ground, and practice turning it and getting it to fly in certain directions. Be patient, that is why I busted mine up, I wasn't being patient and wanted to "See what it could do" which obviously was a mistake.
When you turn on the remote the very first time. Turn on the helicopter first and the red light will light up, which is kind of cool at night, it lights up the front of the copter, which on my red helicopter looked good. But then when that is on, turn on your remote with the switch. The red light will flash, then it is off again. Slowly push the throttle all the way up once, you'll notice it won't turn on the helicopter yet. At the very top, full throttle (the left trigger), the light will blink really fast, then lower the throttle all the way down to the very bottom, and the light will stay on all the way, and then blink slower after a minute. Now you are calibrated and ready to fly.
Directly on the right of the left trigger is a sliding switch, the further it's slid up, the more throttle you'll get at all positions, I put mine 2/3rds of the way up. If your helicopter has a tough time getting a bit higher (not more than 20 to 30 feet), then turn this up. If it climbs too easily, turn this down. If you can't get up easily, also take into account that you may be out of batteries, and need to recharge. The right trigger is to turn the helicopter right or left with the use of the back propeller. It also can be pushed up to give you forward thrust, not a lot but some movement. It can be calibrated with all the sliding switches as well. I am not a pro at it yet, so you'll have to play with it, but while you are, low heights are suggested.
This helicopter can take a 5 or 6 foot fall when you mess up, just immediately turn the throttle all the way off, so the blades don't catch on the ground if it tips over, I can imagine that would break something, but I haven't had that problem yet.
Bottom line, the MAW010B2 is a great helicopter for beginner to intermediate flyer's, ages 12 and up, though I'd suggest those under sixteen have an adult, and you need to take the learning curve slow. The battery, fully charged, will last 10 - 15 minutes of solid flight. It could charge a bit quicker, but when it's ready, you forget the obnoxious wait. It is one of the better-looking starter models. Has a modern look. I have had several compliments on it already. With proper care and increased flight skills, I am sure that this particular electric RC helicopter will bring you plenty of enjoyment over time. To make it last longer, always recharge the battery right after flight exhaustion, and then give it 5 minutes before you take flight again to let the motor cool down. This will help prevent motor "burnout". Also, never leave the battery totally uncharged for a lengthy period of time. Storing a Li-Po battery uncharged could cause it to be unable to hold a charge and results in having to replace the battery sooner than later. Batteries are not cheap. And always, always fly in an area completely free of obstacles to reduce the chance of damage when you crash. If you are patient, and don't fly out of your range of control, she'll last a nice long time. It'll give you plenty of bang for your buck.
To see a picture or purchase the MAW010B2 come take a look at our site. Also, feel free to look at all of our other Electric RC Helicopters!
cuisinart pure indulgence ice cream maker shotgun microphone articulated tv wall mount
wraparound sunglasses laurex messenger bag gelato ice cream maker
nemox pro 1700 ice cream maker donvier ice cream maker recipes
Once you're familiar with flying RC helicopters, the next step that you're most likely to take is learning how to perform tricks. There are a number of tricks that can be done with RC helicopters, and each one is just as exciting as the next. Performing tricks are for experienced flyers, so if you're just starting out, learn the basics of flying RC helicopters first.
Split-S. This is a half loop and a half roll. Either the loop or the roll can come first, followed by the other. If you roll to inverted first, pull out right side up with a half loop. Do a half loop to inverted, then roll to right side up to gain altitude.
Tic-toc. When you make the helicopter look like the boom is fastened to a metronome, you're doing a tic-toc. Alternate positive collective and backward elevator with negative collective and forward elevator in order to maintain altitude.
Death spiral. This is when you go from a high hover to a 90-degree bank with zero collective and zero speed, then give full forward or back elevator only for as long as you can. Correct any time by banking the opposite like you did to begin the bank. Don't wait too long for the tail may not keep up and the helicopter will dive nose down.
Moon walk. This is when you go through the motions of a loop, but it looks stretched out so it's not really a loop any more. Enter as a regular loop. When you're vertical from the 1/4 of the loop, add plenty of negative so it maintains its forward momentum. Keep the elevator steady the entire time. You'll end up flying backwards inverted for a couple of seconds, but keep your hold on the elevator. As the helicopter points straight down, start adding lots of positive collective and level out.
vitromex ceramic tile Wheatgrass Juice Extractor Lighted Magnification Mirror
slipcover for chaise lounge hawkins futura pressure cooker black decker jump starter
Which low-cost remote-control helicopter models are good for first-time fliers?
Beginners will appreciate a quick learning period requiring minimal practice to fly the RC helicopters we're discussing here. Even if you're not spending a lot you should expect four-channel controls and low maintenance costs. I recommend: the Esky Honey Bee 2, the Esky Honey Bee CP 3, the Skyartec WASP V3, or the Syma S009.
Which RC helos do you suggest if I wanted to spend maybe or more for more features?
More features for more money is a given. These RC helis have easy-to-fly controls common in the new generation of RC birds. These helicopters are controlled via a three-channel transmitter that provides four-way directional control (forward, ascend, left, and right). Plus, these models offer adjustable trim via the on-board potentiometer. Another perk is maximum crash resistance - harder to crash land and less likely to break. Good choices if you'd like to upgrade to a beginner-friendly but more sophisticated remote control helicopter include: The Syma RC Helicopters S023, S009, or the Double Horse RC Helicopters models 9060, 9081, 9088, 9089, 9070.
And what if my budget allows for an extra 0, what other features should I expect?
Take a look at the Esky 2.4GHZ Honey Bee King 3 or the Esky 2.4Ghz Belt cp v3. This category of RC helos can handle more rigorous 3D flying techniques. These models have high-performance heading lock gyros that enable sport flying and 3D aerobatics
And, if you have multiple remote-controlled toys flying together, you'll want the new 2.4G remote control system that offsets conflicting frequencies: Advanced Spread Spectrum technology and digital FSK (Frequency Shift Key) coding technology, are also common in this price range. Combined with four digital servos, remote-control helicopter pilots enjoy rapid responses, precise controls, and nimbler movements.
Is there one low-cost model you'd recommend to almost anyone? Why?
Yes, the Esky Honey Bee 3. Its durability allows it to withstand most crashes. Easy maintenance and simplified mechanics set the Honey Bee 3 apart. But the best part? The Honey Bee 3's top-notch motor provides super power for high-performance flight and the 3D maneuvers common in professional 3D aerobatic flight.
Plus, it comes factory-tested and fully assembled. Flying fun right out of the box.
Electric RC helicopters are becoming more and more popular everyday. However, one of their main criticisms is that they lack of big models. Most electric RC helicopters are of the 400 size, which are not even as big as .30 size nitro helicopters - the smallest kind. Electric RC helicopter pilots who wanted to fly bigger models had pretty much only one model to choose - the T-REX 600 which although performs extremely well, comes with a hefty price tag. Now, from the production line of GAUI, maker of many successful models such as the Zoom and the Shogun, comes another model to fill the void in the big electric helicopter market: the Hurricane 550. With a much lower price, the Hurricane 550 will undoubtedly provide pilots who want to try their hands on a big electric model helicopter with a promising alternative.
In The Box:
The Hurricane 550 comes as an ARF (almost ready to fly) kit and claims to be 95% pre-assembled from the factory. You still to install the radio receiver, servos, and the gyro - a task which usually takes at least an hour for beginners. Nevertheless, the main frame, the head set, and the tail come already assembled. The frame is made of a plastic composite material which is strong and durable. The way that each pieces are put together should is quite impressive. Although the model is pre-assembled, the manual provides a comprehensive instruction on how to completely rebuild it from scratch. This is very thoughtful as lacking these instructions would make extensive repairs a daunting task.
The canopy comes already pre-painted. For many people who painting is not their strongest trait, this canopy is great news. On the other hand, others who enjoy airbrushing their own helicopter may be less appreciative. On the quality side, it should be noted that the canopy is noticeably thinner than other models, making it more brittle-prone. However, its thinner canopy is a good weight-saver. This kit also includes a motor and a speed controller. The motor, the 800 KV outrunner, has been upgraded to generate less heat and consume less power.
As for the battery, the Hurricane draws its required 22.2 V from two 11.1V packs. Personally, I think this is a very smart way to implement its power system - unlike the T-Rex 600 which requires a whole new expensive battery pack.
The wooden blade that comes included with the kit is already sufficient. However, for modelers who would like something different, this model can take any blades that is suitable for a .32 size nitro helicopter; namely blades from the 470-550 size.
In Flight:
In flight the Hurricane 550 proves an able helicopter. Beginner to intermediate pilots should find that this model is great fun to fly, nimble and crisp. It is not as aggressive and the T-REX 600, but then again, you wouldn't want to push this model to fly out the most demanding 3D maneuver as the swash plate is made of plastic. As for the flight time, this model can stay in the air for 8 minutes of ordinary flight and 5 minutes of 3D flight. All in all, although this model doesn't come with the aluminum tails, carbon bodies, and the shiny accessories of the T-REX, it is definitely worth its price.
More and more hobbyists are getting hooked to the fun and pleasure of flying an RC Airwolf Helicopter. This model aircraft is becoming increasingly popular among enthusiasts as well as newbies because it gives you the ability to control the device just like you're flying a real-sized helicopter--and perhaps even better because model devices are more capable of certain maneuvers such as backwards flight, hovering, and other freestyle techniques.
The Airwolf is actually modeled after the 1980s television series helicopter of the same name, and if you're familiar with it, you can see just how much it resembles the original chopper. Its trademark design is that of a sleek black finish with a white detail in the bottom part, but you'll also find other color variations such as grey and blue.
To give you some general information regarding this super cool and enjoyable hobby, go ahead and read the following points below. You might just realize that this is exactly the hobby you've been waiting for.
Model Types
There are basically two types of model helicopters:
1. Fuel-powered - uses nitro, petrol, gasoline or gas-turbine
2. Electric-powered - uses batteries
There's no definite way to ascertain which type is better because it really depends on each hobbyist's preference. To help you pick the right model, you need to know your budget and the specifics such as the power source, engine capacity, speed controller, brand, and so on.
Average Costs
If you're thinking of flying an RC Airwolf Helicopter as a hobby, the first thing that might enter your mind is the cost involved in purchasing one. The truth is that having your own model used to be quite expensive, but now that it's getting really popular, you will be thrilled to know that the prices have gone down significantly.
The main thing that makes the item costly is its type of power source. Fuel-powered models have always been more expensive--they can go from ,000 to ,000. But despite the high price, they always give quality performance and have longer flight durations (7-14 minutes).
On the other hand, battery-powered devices are more affordable. You can get them for as low as 0, and the more complex models may run up to ,500. Electric helicopters are common among most hobbyists because of its inexpensiveness, but they do have shorter flight durations (4-12 minutes).
Do keep in mind that prices vary according to the manufacturer, engine size and other factors. When purchasing your first chopper, be sure to know exactly what you're going to use it for and how much you're willing to spend. If you plan to enter flying competitions or start a collection, then you might need a more capable brand, but if you're simply using it for recreational purposes, then a more affordable but quality model will do.
Flying Mini Helicopters as a Hobby
Gone are the days when hobbies were only comprised of boring activities like coin collecting, knitting and bird watching. Nowadays, people have much cooler options and have the chance to really enjoy what they're doing. So if you're a hobbyist who's in need of a thrilling outdoor pastime, then flying an RC Airwolf Helicopter is definitely suitable for you! Go ahead and look for your specific model right now so you can start experiencing the breathtaking excitement that this mini chopper brings.
Waring Ww150 Waffle Maker cherry blossom wall decal lotus cat tree
Aviate Height: 5-6m Function: Up/Down, Left/Right, Forward/BackwardProduct is 100% new, never usedFULLY ASSEMBLED, READY TO FLYFlight Time: 6-8 minutesController Type: A pole squareBattery for controller: load 6"AA" batteries3-channel Infrared controlling3 selectable bands (A/B/C) let's you FLY UP to 3 HELICOPTERS at onceAuto stable & precision speedMade of Unique Material to Withstand Crashes Product size: 26.5*37*10.5cmCharge time: 30 minutesAviate Time: 6-8 minutesAviate Height: 5-6mAviate Area: 5-6mFrequency: Band A, B, C assorted 1x Helicopter1 x Remote Controller1 x Charger1 x Instruction Manual
cat scratcher furniture olympus 6000 waterproof camera powerband wristband
Availibility : Usually ships in 24 hours
If you're interested in a remote control helicopter, you will probably know by now that they can be quite complicated and you will have to do some basic research before settling on the right one for you. Don't worry the research should be easy and fun.
If you are just starting off with this hobby, then consider how much time free time you will be able to use to enjoy it. Although this is becoming a really popular hobby, it does require your dedication and loyalty to it. You can either go for an almost ready to fly helicopter which has been almost totally assembled - you have to do the extra 10% to finish it and there can be extra parts. If you enjoy putting things together, they also come in remote control helicopter kits for the builder enthusiast.
Another thing to consider is if you want to fly it indoors or outdoors and if it should be powered by electricity or gas. The gas ones are usually used outdoors and are quite loud and naturally the gas does emit fumes. They tend to be more expensive too. The electric ones run on batteries and are much quieter (and less smelly) than their gas equivalent, and can be used anywhere.
The next consideration is the size. If you are new to this then a small helicopter is the way to go. Regardless of how good you think you are, crashes are usually inevitable at the beginning while you are in the learning stage. In fact, there are excellent flight simulator programs out there which are specifically designed for RC pilots and this might be a great thing to check out.
When you have settled on your choice of a remote control helicopter - or maybe two or three models to choose from, simply do some research online about the particular models you are interested in and their price. I would then suggest you visit an actual store where you can get expert advice and see if their price is a good match. This is definitely a wise consideration than just shopping online. At a store you can learn a lot and the assistants are usually well capable of answering any specific questions you have.
Based on your research, you can then go ahead and buy the helicopter you have decided is the best one for you. Good luck with this amazing hobby.
RC helicopters have truly carved out a niche in the imaginations and hobby pursuits of many more people than in the past, largely due to the advent of inexpensive and technologically advanced electric RC helicopters, the hobby is reaching new heights! Back in the day, which wasn't very many days ago, the choice was limited to gas powered birds, and if you either didn't have the money, skill, or stomach to withstand all the gas and oil smoke and exhaust, you just went in search of something else to do. The idea of flying mini-versions of real helicopters has always captured the imagination of many, but only those with deeper pockets and stronger stomachs could apply. Now, that is no longer the case!
Now, thanks to the tremendous advances in batteries, motors and electronic components over the last few years, electric RC helicopters have carved out a niche all their own, and have claimed a large share of the market. Now you have choices. Who, for example, would have even considered flying their gas powered RC helicopter in the house? Now it's not only possible, but common! Some of the major advantages of electric RC helicopters include no messy maintenance, smaller, more controllable flights, shorter learning curves, less expensive (generally), no noise or any other kind of pollution, and no stalling in mid air, as many gas birds can and will do.
And the batteries for electric RC helicopters are getting better. Most can now handle Lithium Polymer batteries, allowing them to stay aloft as long as their gas counterparts. Easier to learn, most electric RC helicopters use only 2,3 or 4 channels, making getting hang of this a lot easier. Some have twin rotors that spin in opposite directions, obviating the need for tail rotors (and hence another channel!)
And another cool thing is that they are getting me and more advanced, with newer, more powerful and realistic models hitting the shelves all the time. And another great thing about electric RC helicopters, and is that they are much more readily available, now found in most toy stores and not only in hobby shops, as most gas powered models are.
Electric RC helicopters have landed and are here for the long haul! Take one out for a spin today!
golf clubs sets for beginners canopy garden swing Chalkboard Calendar Wall Decal
What is the best remote control helicopter?
I've been very interested lately in a lot of different models of RC helicopter and as I've been doing my research trying to decide which one to buy next, I've come to realize just how many different types of RC choppers there are!
The first thing you need to decide is whether or not you want to buy an indoor chopper or an outdoor chopper. Now, an indoor chopper is strictly indoors and these can usually be had for around -40 dollars. Outdoor choppers will run you more money but they are usually larger and have better performance over all.
Keep in mind that with some outdoor choppers you won't be able to fly them inside at all. They are simply too big and require too much room to maneuver to make flying them in a typical room unpractical. There are however some models that sort of blur the line between indoor and outdoor like the Madhawk 300 which is big enough to perform outside (as long as it's not TOO windy) but small enough that you can practice indoors. Once you decide on an indoor or outdoor model than you consider these types before making a purchase:
Double Co-Axial Choppers
These are your basic indoor "toy" helicopters. They are easy to fly, easy to maintain and will generally provide a great deal of fun while cruising around your apartment. They aren't suited for outdoors as the slightest breeze will take them high into the air or smash them into the ground (usually causing a lot of damage!). They make a great conversation piece for your office and are perfect for wasting a bit of time!
Single Co-Axial Choppers
Basically the same as the above except some of these are large enough to fly outdoors. They are stable enough that pretty much anyone can get them to hover and move forward without much effort. Again these are beginner choppers.
Micro RC Choppers
These are the ones that you're probably most used to seeing these days. Normally they will fit in the palm of your hand and although the basic gear underneath is usually the same, they come in a variety of styles including Military and Commercial air craft. When they first appeared on the scene these choppers were really nothing more than cool looking toys that did not fly very well but with recent advancements in the technology these choppers are VERY flyable and are perfect for beginner-intermediate users looking for an easy to fly chopper to hone their skills on.
4 and 6 Channel Choppers
These are the more advanced choppers for people who are into modding and upgrading. Probably not a good first-time chopper as they are more expensive and more prone to damage in the event of a crash (and trust me, you will crash them!).
2.4 GHz Remote Systems
These days you should always try and go with a 2.4 GHz remote system. This refers to the frequency that the choppers controls operate on and 2.4 takes up less current than the older systems. Meaning you get more flying time for each charge and in the world of RC Helicopters, flying time is what it's all about!
The Best Chopper?
Well as you can see, it really depends on your level of skill and where you want to use it. But, from personal experience I would recommend: The Syma S107 for an Indoor Chopper and the Madhawk 300 for an indoor/outdoor chopper. Both are priced very reasonably and offer great quality for the money. Please check out my link below for more detailed reviews on both of those choppers as well as other great reviews on all sorts of RC helicopters and replacement parts!
Cheers!
graco snugride infant car seat 5 gallon ice cream maker spiderflex bicycle seat
Blade's mCX Tandem Rescue is a fun new twist on the wildly popular Blade mCX platform. It comes out of the box ready for flight with Spektrum 2.4GHz DSM control, a realistic looking rescue heli body and working navigation lights. Everything you need for indoor aerial adventures like nighttime family room patrols or survivor extractions from the top of the fridge.
Several RC Airplane flying enthusiasts build their own airplane. Building a RC airplane is both fun and challenging. If you want to build your own remote controlled airplane you can follow the tips mentioned below:
1. The first thing is to choose a RC Airplane kit that is easy to build. You can opt for a starter plane kit. These kits come with easy to assemble precut balsa wood pieces. You only need to buy the electronics to complete construction of your remote controlled aircraft. While buying the kit, make sure that you choose a transmitter and receiver that are compatible with your kit. You can find all the spare parts easily available in all hobby shops.
2. Find a big work area like a garage, spread all the parts, and be sure that all the wooden pieces are in good order.
3. Start with assembling the fuselage of your RC airplane. Assembling of the body of the airplane will depend on the type of kit you buy. Your kit may have precut pieces or you need to cut the pieces by yourself. If it is not precut, you can cut the pieces using a knife. While you cut you must apply even pressure through the wood so that the parts don't get damaged. Once cut, you can glue and put together the body parts.
4. Next, assemble the wings, tail and rudder pieces. Glue the pieces and allow it to dry for sometime.
5. Place a skinning material and skin the airplane smoothly as you move along the parts of the plane. You must make sure that there are no wrinkles as it can cause a problem to the flight mechanics of your RC Airplane.
6. Connect the tail, rudder and wings to the fuselage using pins and glue depending on the design of your airplane.
7. Place the push rods, control horns and mounting pates to the body of your airplane. Next, attach the RC receiver, speed controller and battery to the airplanes body and wire the electric system. Connect the battery to the receiver and shut the electronics compartment.
8. Turn on the RC transmitter to test the control systems. Ensure that the moving parts in your RC airplane are reacting precisely to the transmitter signals. Make changes if necessary. Once the parts move in coordination with the receiver, you are all set to fly your RC airplane.
revere pressure cooker cloth diaper trial laundry hamper wicker
Beginning a new hobby is a great adventure for anyone. It is like facing open and blue skies with possibilities for fun and adventure. If you are considering certain hobbies, you might want to think about flying model planes or helicopters. If you have this in mind, you can think about some things to help you in getting started with radio controlled helicopters. By knowing how to start, you will be able to move into more complex models and movements later on.
One of the most important things that most hobby flyers will say is that when you are getting started with radio controlled helicopters, you want to make sure that you can control everything. This means starting with some basic helicopter structures that are easier to handle. By doing this, you can be sure to adapt to the necessities of flying without ruining your first model. If you aren't even sure where to start, you can look at training kits that might come with the different models to help you learn your new craft.
The most important part of any beginner helicopter is the ability to control the flying of the helicopter. Of course, this will mean starting slow, then building up to more complex abilities. For many, this may mean beginning with a helicopter to fly indoors. This will guarantee that you don't break the model and can get used to how it works. The hardest part of starting with any helicopter is in maintaining the control of how the flight is performing. Before moving into the great outdoors, you will want to experiment with this to make sure that you can control what the helicopter is able to do. This will also prevent any crashing that may occur if you are outside and trying more complex stunts.
Another part of getting started with radio controlled helicopters is in the way that the helicopter is structured. Many of the more advanced helicopters will have a more complex structure in order to perform more tasks. However, a beginning structure will begin with a double oar coaxial structure. While this makes it so that it won't move as fast, it will also give you the ability to have a reliable helicopter as you maneuver it around for practice.
Of course, with any of the beginning helicopters, they will also have the ability to do more than you think. After you get used to the helicopter, you can also learn how to move it in different ways and maximize its capacities to work for you as a model. This is important to keep in mind while you are looking at the different possibilities for your helicopters.
Getting started with radio controlled helicopters will mean finding the best of the bunch for your needs. There are several possibilities for you in the way of models that are designed specifically for beginners. Following simple techniques before moving into more complex models is the best way to begin. By looking at the beginning possibilities, you can get ready for higher and better take offs.
Sale Price : $17.99
Availibility : Usually ships in 1-2 business days
Available Stores
|
In this article, I will explain how to choose a remote control helicopter which is best suitable for your demands. When we think of remote control (RC) helicopters, we also think of various issues attached to it, like the spare parts, size, price, fuel and other cost which come along with them. Choosing the right helicopter isn't as hard as you might think it is, and if you plan carefully you can make the most out of your first remote control helicopter. How to choose the best remote control helicopter:
Check the size: Most of the people simply want to buy the most expensive helicopter which comes under their budget, thinking maybe this is the best and perhaps RC helicopters have different sizes, some are as small as your palm while others are as big as a real car. The best thing is to determine where would you be flying your RC helicopter? If you are going to sit inside your comfort zone and fly it in your house then you should always prefer the smaller one, and if you are going to go out and fly it then choosing the bigger is more logical.
Parts and Upgrades: Buying an RC helicopter is the easiest task, but maintaining it is not as easy as one might think. Most of the beginners tend to crash their RC helicopter in their first flight, they either crash land it or they accidentally hit it into some wall or tree. But that's okay, unless you can get their service parts handy. Always make sure there are enough service upgrades available from the manufacturer before buying an RC helicopter. Once you've crashed it, you wouldn't want to search all over the internet looking for little part from a long shut manufacturing company. Buying a remote control helicopter from a reputed brand like SYMA, SAN HUAN turns out to be better in a long term. You can upgrade parts, you can repair your fractured helicopter and you can do much more.
Commitment: Before making any decision always think of how committed you are going to be with your remote control helicopter, if you are planning to use it only few hours a week or maybe once in a while then you should prefer a helicopter which suits your need. Buying an expensive helicopter only to later find out that you aren't making the best of it would be rather disappointing. While, if you are looking forward to give your flying skills a lot of time then, by all source grab the expensive one right off the bat.
So, before you can finalize your remote control helicopter, remember to check for the size, look for the parts & upgrades and most importantly know how committed you are.
Included with kit:
● 425D carbon fiber blades X1
● RCE-BL60G 60A Brushless ESC X1
(Built-in 5-6V step-less adjustable BEC)
● 500M Brushless motor X1
● Motor ponion gear 13T X1
● DS510 Digital Servo X3
● DS520 Digital Servo X1
● GP780 Head lock gyro X1